HP ILO
Introduction
The HP ILO probe uses the snmp protocol to perform its queries.
Features
The HP ILO probe consist of a number of specific checks:
System status (fan, power supply, memory, teperature cpu)
HP Eventlog
Array controller
Storage (logical, phycial)
Deployment
The HP ILO probe can easily be deployed using our appliance manager.
Credentials
As the HP ILO probe uses SNMP the SNMP section in our credentials documentation is applicable for this probe.
The probe configuration uses the hpilo section as default in the InfraSonar credentials file.
Conditions
The label HP ILO can be used to configure our default condition set.